PHYHOO JEWELRY TOOLS Pneumatic Engraving Machine Graver Helper Jewelry Engraver Mate Double Ended 2 Hand Pieces 220/110V

Pneumatic Engraving Machine With 2 Handles

Availability: In stock

$319.99 $399.99

QUESTIONS & ANSWERS

Ask More Wholesale Prices. (100QTY+)

Be the first to ask a question about this.

Ask Questions

Guaranteed safe checkout:

Installation:

1. Size carved handle. Foot opening panel interface connector.

2. The air compressor trachea insert air intake on the back of the engraving machine, it is recommended that the installation of relief valves and water separation filter, air compressor and engraving machine pipeline to increase machine performance.

Methods of operation

1.Shut down the switch of AIR PRESSURE CONTROL KNOB & AUXILIARY AIR OPEN / CLOSE.KNOB FOR OUTLET BELOW to avoid the damage of pressure gauge and reducing valve due to strong air pressure.

2. After connecting all accessories with the machine, turn on the power .(The indicator light is shine )

3. Put the ON/OFF Switch to Position (1) or (2).

4. Adjust the air pressure and the rotate speed , hold the handpiece like a table knife , step on the foot control to max ,adjust AIR PRESSURE CONTROL KNOB slowly to the gauge show 1.5-2kg meanwhile adjust the STROKES PER MINUTE SELECTOR KNOB , in order to make the impact of handpiece No.1 reach the maximum., then press the AIRPRESSURE CONTROL KNOB.

5. Loose the foot control , the graver handpieces stop working , intall the graver tools into the handpiece.

6. Turn the HANDPIECE SELECTOR KNOB to Switch Handpiece No.1 No.2 .

7. When you using Hnadpiece No.2 –rotate handpiece , shut off the power , turn on AUXILIARY AIR OPEN CLOSE.KNOB FOR OUTLET BELOW to adjust AIR PRESSURE CONTROL KNOB.

8. Step on the foot pedal to control impact.

Maintenance

1. Engraving machine used for a period of time, it should be the back of the machine reducing valve cups drained.

2. To mechanical oil adding an appropriate amount of the 10th size carved handle!

3. If the fault, not blindly demolished, the staff checks and maintenance.

Product information

Voltage:220V,50/60Hz

Rotate Speed:100-4000RPM

Air Pressure:0-3kg/cm²

Package weight: about 8kg

Volume: 32cm x27cm x 25cm

Packaging information

1 x Graver helper(Graver Engraving Machine)

1 x Foot Control

2 x Cable

2 x Handpieces

Shipping Policy

Shipping cost is charged by the shipping agency according to the destination, the weight and the shipping method.

Delivery time depends on the destination and the shipping method you choose. Phyhoo offers the following shipping methods to ensure the safe delivery of your package

FedEx, DHL and UPS are the fastest delivery methods available. Delivery time is 3 ~ 7 days to all major destinations. Products weighing more than or equal to 2KG will be shipped by FedEx, DHL and UPS by default.

According to your shopping cart, the system will automatically choose the most economical way for you from DHL, UPS and FedEx.

EMS will take 7~21 working days to arrive. Products weighing less than 2K can choose this shipping method.

Orders are processed and delivered Monday-Saturday (excluding public holidays)

Tip: Phyhoo is not responsible for the shipping delay that caused by the severe weather, such as stormy snow or other causes that beyond our control.

30 Days Free returns

We are proud to guarantee 100% satisfaction with all items you purchased on phyhootool.com. If there is any dissatisfaction with your purchase for any reason, full refunding, Unconditional Return and 100% Exchange could be accepted within 30 days from the date of delivery.