PHYHOO HH-E03 G-Mate Pneumatic Engraving Machine | 100W 0–5000 RPM Universal Voltage

A pneumatic hand engraver built for jewelry bench work — 100W power, 0–5000 RPM handpiece speed, 0–60 PSI pressure regulation with built-in gauge, and 100–240V universal voltage. Designed for hand-guided engraving, carving, bead-edge work, and stone-setting preparation on metal jewelry pieces.

Key Selling Points

• 0–5000 RPM Adjustable Handpiece Speed — Match engraving rhythm precisely to different patterns, metals, and detail depths.
• Built-In Pressure Gauge and Regulator — Visible 0–60 PSI pressure control for consistent, repeatable pneumatic output across sessions.
• Foot Pedal with Non-Slip Surface — Adjustable speed pedal with stainless steel spring keeps both hands free for precise workpiece and handpiece control.
• 100–240V Universal Voltage — Works globally without selecting a voltage version. Confirm plug type compatibility for your local outlet.
• Compact Bench Footprint — 27 x 14 x 22.5 cm (10.6 x 5.5 x 8.9 in) control unit fits into a standard jewelry bench setup without a dedicated station.
• Metal Impurity Filter Included — Additional filter collects metal particles during engraving to help maintain clean air and consistent tool performance.

About This Product

The PHYHOO HH-E03 G-Mate is a pneumatic hand engraving machine designed for jewelry bench tasks where hand-guided control and repeatable pneumatic output are both essential. It supports detailed engraving, carving, bead-edge design, pattern work, and setting-related bench work on metal jewelry pieces including rings, pendants, bracelets, and charms.

The compact control unit combines a pressure gauge, regulator, 0–5000 RPM handpiece speed range, and an adjustable foot pedal. A stable compressed-air source, compatible handpiece tooling, and secure workholding are required for practical use.

Pressure and Control Setup Guide

Best For / Not For

Technical Specifications

Pro Tips

• Begin with lower pressure and a gentle pedal response, then increase gradually as the cut and material require — this prevents over-cutting on fine detail work.
• Secure the workpiece in a vise, engraving block, or suitable clamp before bringing the handpiece to the surface.
• Practice on scrap metal before engraving finished jewelry, especially when learning pressure and speed response on a new material.
• Note the pressure gauge reading during setup so repeated work sessions can start from a known, consistent setting.
• Clean the metal impurity filter regularly to maintain consistent air flow and prevent debris from affecting handpiece performance.

Frequently Asked Questions

• Is this a laser engraver? — No. The HH-E03 is a pneumatic hand engraver for hand-guided jewelry bench work, not a laser engraving or marking machine.
• Is an air compressor included? — No. A compatible compressed-air source is required for operation but is not included. Ensure output is within the 0–60 PSI working range.
• What voltage does it support? — 100–240V universal input. No voltage version selection is needed; confirm plug type compatibility for your local outlet.
• Are engraving cutters and vises included? — No. Cutters, vises, clamps, and workholding accessories are not included. Prepare compatible gravers and fixtures before use.
• What tasks is it suitable for? — Metal jewelry engraving, detailed carving, bead-edge design, pattern work, and setting-related hand-guided bench tasks on rings, pendants, bracelets, and charms.
• How do I contact PHYHOO with questions? — Reach the PHYHOO team at sales@phyhoo.com. We respond within 24 hours on business days.

What's Included

• 1 x HH-E03 G-Mate pneumatic hand engraving machine (control unit)
• 1 x Adjustable foot pedal
• 1 x Metal impurity filter
• 1 x Power cord
• Air tubing and fittings

Support

Questions about this pneumatic engraving machine or order status? Contact the PHYHOO team at sales@phyhoo.com. We respond within 24 hours on business days.