PHYHOO JEWELRY TOOLS Pneumatic Engraving Machine With 2 Handles

Graver Helper Jewelry Pneumatic Engraving Machine with Two Handpieces

Availability: In stock

$269.99 $399.99

110V

220V

QUESTIONS & ANSWERS

Ask More Wholesale Prices. (100QTY+)

Be the first to ask a question about this.

Ask Questions

Guaranteed safe checkout:

Main Parameters:
Voltage: 220V/110V,50/60Hz,
Power: 60W,
Air Pressure:0~3kg/c,
Rotate Speed: 100~4000RPM,
Dimension: 260x210x250mm,
Packing Size: 315x27x250mm,
Weight: 8.0kg,
Accessories: 2 pieces Handpieces, 1 piece Foot Control, Cables.

Installation

1. Size carved handle Foot opening panel interface connector.
2. The air compressor trachea insert air intake on the back of the engraving machine, it is recommended that the installation of relief valves and water separation filter, air compressor and engraving machine pipeline to increase machine performance.

Methods of operation

1. The first pressure adjustment knob and rotate the handle switch shut down to avoid the pressure too great damage to the pressure in the table and the pressure relief valve
2. power, turn on the power switch (Light).
3. the position of the changeover switch is set to 1 or 2
4. adjust the air pressure and speed, hand carved handle by stepping foot switch to adjust the pressure knob slowly Pressure gauge indicates of 1.5 ~ 2KG / CM2, adjust the speed knob at the same time, the combination of the two regulation carving handle. the biggest impact, pressure adjustment knob is pressed.
5. the relaxing foot switch, carving the handle to stop working, as shown below loaded tool!
6. size carved handle switch, turn the the conversion handle set and 2 and 1osition (should go to bits)
7. rotary engraving handle work, turn off the power switch, open the rotating handle switch, adjust the pressure knob.
8. hours of work with the footswitch opening increases smooth small to large control impact

Maintenance

1. engraving machine used for a period of time, it should be the back of the machine reducing valve cups drained.
2. to mechanical oil adding an appropriate amount of the 10th size carved handle!
3. If the fault, not blindly demolished, the staff checks and maintenance.

Shipping Policy

Shipping cost is charged by the shipping agency according to the destination, the weight and the shipping method.

Delivery time depends on the destination and the shipping method you choose. Phyhoo offers the following shipping methods to ensure the safe delivery of your package

FedEx, DHL and UPS are the fastest delivery methods available. Delivery time is 3 ~ 7 days to all major destinations. Products weighing more than or equal to 2KG will be shipped by FedEx, DHL and UPS by default.

According to your shopping cart, the system will automatically choose the most economical way for you from DHL, UPS and FedEx.

EMS will take 7~21 working days to arrive. Products weighing less than 2KG can choose this shipping method.

Orders are processed and delivered Monday-Saturday (excluding public holidays)

Tip: Phyhoo is not responsible for the shipping delay that caused by the severe weather, such as stormy snow or other causes that beyond our control.

30 Days Returns

We are proud to guarantee 100% satisfaction with all items you purchased on phyhootool.com. If there is any dissatisfaction with your purchase for any reason, full refunding, Unconditional Return and 100% Exchange could be accepted within 30 days from the date of delivery.