PHYHOO JEWELRY TOOLS DX-YQ050 Argon Sparkle Welder

DX-YQ050 Argon Sparkle Welder

Availability: In stock

Regular price $299.99

110V

220V

QUESTIONS & ANSWERS

Ask More Wholesale Prices. (100QTY+)

Be the first to ask a question about this.

Ask Questions

Guaranteed safe checkout:

Applications:

- Precious metal alloys; gold, silver, platinum a,nd palladium
- Titanium and stainless steel.
- With some limitations, aluminum, tin a,nd most brass alloys
- Alloys with different attributes that are incompatible inwithormal welding
-Alloys that would oxidize during welding and thus require an inert(Argon) atmosphere

Sparkle welder which uses by jewelers:

-Precisely position parts by tacking with the spot welder
-Welding of necklaces with a diameter of 0.5mm to 2.8mm (smaller diameter may melt)
-Repair metal joints or breaks without removing set stones or pearls
-Repair heat-sensitive metals or metal alloys
-Repair the surface or entry point of a molding of the same alloy

With the inert argon atmosphere, welding can be done without requiring fluxing. The soldering point is smooth and does not require scaling or scale removal.

Installation and Testing

1. Connecting electrode, black wire to black connection (ground/cathode), red wire to red connection (positive /anode).
2. Connect argon gas through the argon gas pressure-reducing valve; adjust the gas pressure reading to the minimum
3. Tungsten needle can be sharpened by grinding on the grinding wheel, or with the use of a Fordham flex shaft or Dremel tool and an abrasive

Installation and commissioning

A. Negative electrode connected to the output folder, output connected to the positive electrode holder.
B. argon by reducing valve, connected to its output argon
C. can be sharpened tungsten needles in the sand turbines, use of sophisticated power management workplace.
Entrance, argon valve transferred to the gas ( argon gas protection models)
D. When installing welding tungsten needle protruding head around 5MM, 0.1mm diameter tungsten needle

Procedure

1. Power on, and turn on the power switch.
2. Knob to adjust the power, the general ( coarse ) adjustment scale of 1 to 1.5 ( fine-tuning )
3. To adjust the scale value 7-8 ( can be adjusted according to job requirements scale value ).
4. Sandwiched tweezers workpiece interface aligned tungsten needle ( best distance is 0.5mm), the workpiece
5. Can not touch the tungsten needle.
With the foot about a foot switch ( feet away ), spot welding is completed.

Precautions

Not long stepping foot pedal switch, step on right away, if prolonged stepping on the foot switch, the
machine is short-circuited, it will burn out the internal circuitry.
This machine is a precision device, please use care.
Flash on the eye injury, and do protective measures used.
Depress the foot switch, the hands do not touch the metal part while the tungsten needle and
tweezers, whether
there were tingling.
Non-professionals, do not overhaul, there are high-pressure